+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2213 E-2RS1TN9 · 65 × 120 × 31

Self-aligning ball · 2213 E-2RS1TN9

radial — mediumaxial — low, on both sides
    Drawing of 2213 E-2RS1TN9: ⌀65 × ⌀120 × 31 mm⌀120⌀65312213 E-2RS1TN92RS1
    Fig. 1: 2213 E-2RS1TN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2213 E-2RS1TN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2213 E-2RS1TN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 9 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    2RS1contact seals on both sides
    Clearance
    normal clearance
    C
    35.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 120 × 31 from other brands

    10 products
    Series illustration (not a photo of this item): 2213 E-2RS1TN9
    You are viewingSKF 2213 E-2RS1TN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22132213open, no protection, standard designCT65 × 120 × 3139 pcs€7.59
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 K TVH C3open, no protection, clearance C3, TVH, 1:12 tapered boreFAG65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 K C3open, no protection, clearance C3, 1:12 tapered boreKoyo65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213KC3 5open, no protection, clearance C3, 5, 1:12 tapered boreNSK65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 EKTN9open, no protection, different cage, E, 1:12 tapered boreSKF65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 EKTN9/C3open, no protection, clearance C3, different cage, E, 1:12 tapered boreSKF65 × 120 × 31available to orderon request
    • Series illustration (not a photo of this item): 2213 ETN9/C32213 ETN9/C3open, no protection, clearance C3SKF65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 2RS TVHTVHFAG65 × 120 × 31available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 E 2RS1KTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF65 × 120 × 31available to orderon request
    02

    Often bought with this

    shaft snap ring Ø65, bore snap ring Ø120, seal 65×120

    5 products
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    • Seal 65×120JULU 065-120-10 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €1.23270 pcs
    • Seal 65×120JULU 065-120-12 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing; the bearing has its own seals (2RS1), and the oil seal closes the unit from outside
      €1.23available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 120 × 31mm
    Cdynamic 35.1kN

    Self-aligning ball bearing 2213-2RS, design 2RS1: contact seals on both sides.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet