+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
2213 EKTN9/C3 · 65 × 120 × 31

Self-aligning ball · 2213 EKTN9/C3

radial — mediumaxial — low, on both sides
    Drawing of 2213 EKTN9/C3: ⌀65 × ⌀120 × 31 mm⌀120⌀65312213 EKTN9/C3
    Fig. 1: 2213 EKTN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 2213 EKTN9/C3

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 2213 EKTN9/C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 8 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    C
    57.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 65 × 120 × 31 from other brands

    10 products
    Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm
    You are viewingSKF 2213 EKTN9/C3

    Everything the number specifies matches: series 22, 65 × 120 × 31 mm, open, no protection, K, clearance C3, special design. The codes in the number are read against the SKF catalogue.

    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 EKTN9/C3This bearingSKF65 × 120 × 31available to orderon requestyou are here
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 K C3Koyo65 × 120 × 31available to orderon request
    02

    Often bought with this

    adapter sleeve H313, lock nut M65×2, lock washer MB13, bore snap ring Ø120

    7 products
    • Adapter sleeve H313CT H 313 SILVERWhy it fits: H313 for 2213 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      €4.02131 pcs
    • Adapter sleeve H313CT H 313 WITH BLACK KMWhy it fits: H313 for 2213 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      €2.94available to order
    • Lock nut M65×2CT KM 13Why it fits: KM13 is the nut for sleeve H313: thread M65×2
      €1.59395 pcs
    • Lock nut M65×2IBU KM 13Why it fits: KM13 is the nut for sleeve H313: thread M65×2
      Price to be confirmedavailable to order
    • Lock washer MB13CT MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      €0.36740 pcs
    • Lock washer MB13IBU MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 120 × 31mm
    Cdynamic 57.2kN

    Self-aligning ball bearing 2213 K C3.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet