+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1212 ETN9 · 60 × 110 × 22

Self-aligning ball · 1212 ETN9

radial — mediumaxial — low, on both sides
    Drawing of 1212 ETN9: ⌀60 × ⌀110 × 22 mm⌀110⌀60221212 ETN9
    Fig. 1: 1212 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1212 ETN9

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1212 ETN9

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 11 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    22 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    31.2 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 22 from other brands

    13 products
    Series illustration (not a photo of this item): 1212 ETN9
    You are viewingSKF 1212 ETN9

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 12121212standard designCT60 × 110 × 22133 pcs€5.47
    • Photo: 12121212standard designZKL60 × 110 × 22available to order€13.14
    • Photo: 12121212standard designZ&S60 × 110 × 22available to order€15.32
    • Series illustration (not a photo of this item): 12121212standard designno brand60 × 110 × 22available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 60 × 110 × 22 mm1212 KTNTN, 1:12 tapered boreCT60 × 110 × 22available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 60 × 110 × 22 mm1212K+H2121:12 tapered bore, H212: not decodedCT60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): 1212 K TV1212 K TVTV, 1:12 tapered boreFAG60 × 110 × 22out of stockon request
    • Series illustration (not a photo of this item): 1212 K1212 K1:12 tapered boreGPZ60 × 110 × 22out of stockon request
    • Series illustration (not a photo of this item): 12121212standard designKG60 × 110 × 22available to orderon request
    • Series illustration (not a photo of this item): 1212 K1212 K1:12 tapered boreKG60 × 110 × 22available to orderon request
    02

    Often bought with this

    seal 60×110, shaft snap ring Ø60, bore snap ring Ø110

    4 products
    • Seal 60×110JULU 060-110-12 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      €1.05480 pcs
    • Seal 60×110JULU 060-110-10 TCWhy it fits: Oil seal 60×110: shaft 60 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 110 × 22mm
    Cdynamic 31.2kN

    Self-aligning ball bearing 1212. Under GOST the same bearing is designated 1212.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1212?

    It is the same bearing under GOST 3189-89: 1212 corresponds to the ISO base 1212. Size 60 × 110 × 22 mm, a full equivalent of 1212.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet