+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
1212 K · 60 × 110 × 22

Self-aligning ball · 1212 K

radial — mediumaxial — low, on both sides
    Drawing of 1212 K: ⌀60 × ⌀110 × 22 mm⌀110⌀60221212 K
    Fig. 1: 1212 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1212 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 1212 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 10 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    22 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.31 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 60 × 110 × 22 from other brands

    14 products
    Series illustration (not a photo of this item): 1212 K
    You are viewingGPZ 1212 K

    Everything the number specifies matches: series 12, 60 × 110 × 22 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): 1212 K1212 KThis bearingGPZ60 × 110 × 22out of stockon requestyou are here
    • Series illustration (not a photo of this item): 1212 K1212 KKG60 × 110 × 22available to orderon request
    02

    Often bought with this

    adapter sleeve H212, lock nut M60×2, lock washer MB12, bore snap ring Ø110

    7 products
    • Adapter sleeve H212CT H 212Why it fits: H212 for 1212 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Adapter sleeve H212H 212Why it fits: H212 for 1212 K: 1:12 taper, bore 60 for shaft 55 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M60×2CT KM 12 SILVERWhy it fits: KM12 is the nut for sleeve H212: thread M60×2
      €1.31410 pcs
    • Lock nut M60×2Z&S KM 12Why it fits: KM12 is the nut for sleeve H212: thread M60×2
      €1.96available to order
    • Lock washer MB12CT MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      €0.22202 pcs
    • Lock washer MB12MB 12Why it fits: MB12 locks the KM12 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 110 × 22mm
    mweight 0.31kg

    Self-aligning ball bearing 1212 K. Under GOST the same bearing is designated 111212.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111212?

    It is the same bearing under GOST 3189-89: 111212 corresponds to the ISO base 1212 K. Size 60 × 110 × 22 mm, a full equivalent of 1212 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet