+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6410 2RS · 50 × 130 × 31

Deep groove ball · 6410 2RS

radial — mediumaxial — low, on both sides
    Drawing of 6410 2RS: ⌀50 × ⌀130 × 31 mm6410 2RS2RS
    Fig. 1: 6410 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6410 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NTE 6410 2RS

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 7 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    31 mm
    Width BRing width. Source: supplier data
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    C
    87.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    52 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.9 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 50 × 130 × 31 from other brands

    8 products
    Drawing: 6410 2RS
    You are viewingNTE 6410 2RS

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 64106410open, no protectionCT50 × 130 × 31469 pcs€8.06
    • Series illustration (not a photo of this item): 64106410open, no protectionno brand50 × 130 × 31available to order€10.77
    • Photo: 64106410open, no protectionZ&S50 × 130 × 31available to order€15.34
    • Series illustration (not a photo of this item): 64106410open, no protectionKG50 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 64106410open, no protectionNKE50 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 6410/C36410/C3open, no protection, clearance C3SKF50 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 6410 ZZ6410 ZZmetal shields on both sidesNSK50 × 130 × 31available to orderon request
    02

    Often bought with this

    shaft snap ring Ø50

    2 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 130d 50B 31
    d×D×Bsize 50 × 130 × 31mm
    Cdynamic 87.1kN
    C0static 52kN
    mweight 1.9kg

    Deep groove ball bearing 6410-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180410.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 180410?

    It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0410 corresponds to the ISO base 6410. Size 50 × 130 × 31 mm, a full equivalent of 6410-2RS.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet