+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €8.90 per piece.
6410 · 50 × 130 × 31

Deep groove ball · 6410

radial — mediumaxial — low, on both sides
    Drawing of 6410: ⌀50 × ⌀130 × 31 mm6410
    Fig. 1: 6410, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6410

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 6410

    €10.77per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 3 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    130 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    31 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 130 × 31 from other brands

    8 products
    Series illustration (not a photo of this item): 6410
    You are viewing6410
    €10.77baseline for the price comparison

    Everything the number specifies matches: series 64, 50 × 130 × 31 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 64106410This bearingno brand50 × 130 × 31available to order€10.77you are here
    • Series illustration (not a photo of this item): 64106410CT50 × 130 × 31469 pcs€8.06−€2.71
    • Photo: 64106410Z&S50 × 130 × 31available to order€15.34+€4.57
    • Series illustration (not a photo of this item): 64106410KG50 × 130 × 31available to orderon request
    • Series illustration (not a photo of this item): 64106410NKE50 × 130 × 31available to orderon request

    Under the price: the difference from the price of this bearing (€10.77).
    02

    Often bought with this

    shaft snap ring Ø50

    2 products
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 130d 50B 31
    d×D×Bsize 50 × 130 × 31mm

    Deep groove ball bearing 6410. Under GOST the same bearing is designated 410.

    Frequently asked questions

    What is 410?

    It is the same bearing under GOST 3189-89: 410 corresponds to the ISO base 6410. Size 50 × 130 × 31 mm, a full equivalent of 6410.

    Will 6410 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet