+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
22310 KW33 · 50 × 110 × 40

Spherical roller · 22310KW33

radial — highaxial — medium, on both sides
    Drawing of 22310KW33: ⌀50 × ⌀110 × 40 mm⌀110⌀504022310KW33
    Fig. 1: 22310KW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22310 KW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22310 KW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 24 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    40 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    220 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 50 × 110 × 40 from other brands

    25 products
    Series illustration (not a photo of this item): 22310KW33
    You are viewingNTE 22310 KW33

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22310 C/W3322310 C/W33C, lubrication groove and holesCT50 × 110 × 40255 pcs€11.65
    • Series illustration (not a photo of this item): 22310 MW3322310 MW33M, lubrication groove and holesCT50 × 110 × 4074 pcs€12.12
    • Series illustration (not a photo of this item): 22310 CA/W3322310 CA/W33CA, lubrication groove and holesCT50 × 110 × 40670 pcs€13.09
    • Series illustration (not a photo of this item): 22310 W33 J C322310 W33 J C3clearance C3, J, lubrication groove and holesNTE50 × 110 × 401,000 pcs€16.43
    • Series illustration (not a photo of this item): 22310 CW3322310 CW33CW33NTE50 × 110 × 4020 pcs€21.16
    • Series illustration (not a photo of this item): 22310 CAW3322310 CAW33CA, lubrication groove and holesNTE50 × 110 × 4019 pcs€21.20
    • Series illustration (not a photo of this item): 22310 CCW33 PQ22310 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE50 × 110 × 40120 pcs€28.05
    • Series illustration (not a photo of this item): 22310 CCKW33 PQ22310 CCKW33 PQCC, lubrication groove and holes, 1:12 tapered bore, PQ: not decodedNTE50 × 110 × 4010 pcs€29.26
    • Series illustration (not a photo of this item): 22310 MBW33 PQ22310 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE50 × 110 × 4028 pcs€35.53
    • Photo: 22310 CC W3322310 CC W33C, lubrication groove and holesZ&S50 × 110 × 40available to order€17.10
    02

    Often bought with this

    adapter sleeve H2310, lock nut M50×1.5, lock washer MB10, bore snap ring Ø110

    7 products
    • Adapter sleeve H2310CT H 2310 WITH BLACK KMWhy it fits: H2310 for 22310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 156)
      €2.1350 pcs
    • Adapter sleeve H2310Z&S H 2310Why it fits: H2310 for 22310 K: 1:12 taper, bore 50 for shaft 45 (Koyo, p. 156)
      €3.96available to order
    • Lock nut M50×1.5KM 10Why it fits: KM10 is the nut for sleeve H2310: thread M50×1.5
      €0.901 pcs
    • Lock nut M50×1.5CT KM 10Why it fits: KM10 is the nut for sleeve H2310: thread M50×1.5
      €1.272,000 pcs
    • Lock washer MB10CT MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.211,138 pcs
    • Lock washer MB10ZKL MB 10Why it fits: MB10 locks the KM10 nut (ISO 2982-2)
      €0.25available to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 40mm
    Cdynamic 220kN

    Spherical roller bearing 22310 K.

    C: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet