+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €17.52 per piece.
22310 CAW33 · 50 × 110 × 40

Spherical roller · 22310 CAW33

radial — highaxial — medium, on both sides
    Drawing of 22310 CAW33: ⌀50 × ⌀110 × 40 mm⌀110⌀504022310 CAW33
    Fig. 1: 22310 CAW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22310 CAW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing NTE 22310 CAW33

    €21.20per piece incl. VAT
    In stock: 19 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 22 approximate
    d
    50 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    110 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    40 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 50 × 110 × 40 from other brands

    26 products
    Series illustration (not a photo of this item): 22310 CAW33
    You are viewingNTE 22310 CAW33
    €21.20baseline for the price comparison

    Everything the number specifies matches: series 223, 50 × 110 × 40 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): 22310 CAW3322310 CAW33This bearingNTE50 × 110 × 4019 pcs€21.20you are here
    • Series illustration (not a photo of this item): 22310 CA/W3322310 CA/W33CT50 × 110 × 40670 pcs€13.09−€8.11

    Under the price: the difference from the price of this bearing (€21.20).
    02

    Often bought with this

    seal 50×110, shaft snap ring Ø50, bore snap ring Ø110

    4 products
    • Seal 50×110JULU 050-110-10 TCWhy it fits: Oil seal 50×110: shaft 50 and housing bore 110, the same as the bearing
      Price to be confirmedavailable to order
    • Shaft snap ring Ø50CT SEG 50 Z by 1000Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      €115.29available to order
    • Shaft snap ring Ø50SEG 50 Z (100 pcs)Why it fits: DIN 471 snap ring for a 50 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø110CT SEG 110 W by 100Why it fits: DIN 472 snap ring for a 110 bore: holds the outer ring in the housing
      €51.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 50 × 110 × 40mm

    Spherical roller bearing 22310. Under GOST the same bearing is designated 53610.

    Frequently asked questions

    What is 53610?

    It is the same bearing under GOST 3189-89: 53610 corresponds to the ISO base 22310. Size 50 × 110 × 40 mm, a full equivalent of 22310.

    Will 22310 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet