+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6800DD NS7S5 · 10 × 19 × 5

Deep groove ball · 6800DD NS7S5

radial — mediumaxial — low, on both sides
    Drawing of 6800DD NS7S5: ⌀10 × ⌀19 × 5 mm6800DD NS7S5DD
    Fig. 1: 6800DD NS7S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6800DD NS7S5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6800DD NS7S5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 19 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    19 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    5 mm
    Width BRing width. Source: supplier data
    Seal
    DDcontact seals on both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 10 × 19 × 5 from other brands

    21 products
    Drawing: 6800DD NS7S5
    You are viewingNSK 6800DD NS7S5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6800 / 61800 ZZ6800 / 61800 ZZmetal shields on both sides, standard designCT10 × 19 × 530,063 pcs€0.28
    • Photo: 61800-2Z61800-2Zmetal shields on both sides, standard designSKF10 × 19 × 5available to order€9.32
    • Series illustration (not a photo of this item): 61800 ZZ61800 ZZmetal shields on both sides, standard designno brand10 × 19 × 5available to orderon request
    • Series illustration (not a photo of this item): 61800 ZZ61800 ZZmetal shields on both sides, standard designCT10 × 19 × 5available to orderon request
    • Series illustration (not a photo of this item): 6800 ZZ6800 ZZmetal shields on both sides, standard designCT10 × 19 × 5available to orderon request
    • Type diagram, no dimensions: ball61800-2Z-HLCmetal shields on both sides, HLC: not decodedFAG10 × 19 × ?available to orderon request
    • Drawing: SS 6800 ZZSS 6800 ZZmetal shields on both sides, stainless steelIBB10 × 19 × 5available to orderon request
    • Series illustration (not a photo of this item): 6800 ZZ6800 ZZmetal shields on both sides, standard designNACHI10 × 19 × 5available to orderon request
    • Drawing: 6800ZZCM NS7S56800ZZCM NS7S5metal shields on both sides, clearance CMNSK10 × 19 × 5available to orderon request
    • Drawing: W 61800-2ZW 61800-2Zmetal shields on both sides, stainless steelSKF10 × 19 × 5available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø19, seal 10×19

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø19CT SEG 19 W by 1000Why it fits: DIN 472 snap ring for a 19 bore: holds the outer ring in the housing
      €10.711 pcs
    • Seal 10×19JULU 010-19-7 TCWhy it fits: Oil seal 10×19: shaft 10 and housing bore 19, the same as the bearing; the bearing has its own seals (DD), and the oil seal closes the unit from outside
      €0.17825 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 19d 10B 5
    d×D×Bsize 10 × 19 × 5mm

    Deep groove ball bearing 6800-2RS, design DD: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet