+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6800 ZZ · 10 × 19 × 5

Deep groove ball · 6800 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 6800 ZZ: ⌀10 × ⌀19 × 5 mm6800 ZZZZ
    Fig. 1: 6800 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6800 ZZ

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6800 ZZ

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    6 exact, 14 approximate
    d
    10 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    19 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    5 mm
    Width BRing width. Source: supplier data
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 10 × 19 × 5 from other brands

    21 products
    Series illustration (not a photo of this item): 6800 ZZ
    You are viewingCT 6800 ZZ

    Everything the number specifies matches: series 68, 10 × 19 × 5 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 6800 ZZ6800 ZZThis bearingCT10 × 19 × 5available to orderon requestyou are here
    • Series illustration (not a photo of this item): 6800 / 61800 ZZ6800 / 61800 ZZCT10 × 19 × 530,063 pcs€0.28
    • Photo: 61800-2Z61800-2ZSKF10 × 19 × 5available to order€9.32
    • Series illustration (not a photo of this item): 61800 ZZ61800 ZZno brand10 × 19 × 5available to orderon request
    • Series illustration (not a photo of this item): 61800 ZZ61800 ZZCT10 × 19 × 5available to orderon request
    • Series illustration (not a photo of this item): 6800 ZZ6800 ZZNACHI10 × 19 × 5available to orderon request
    02

    Often bought with this

    shaft snap ring Ø10, bore snap ring Ø19, seal 10×19

    3 products
    • Shaft snap ring Ø10CT SEG 10 Z by1000Why it fits: DIN 471 snap ring for a 10 shaft: holds the inner ring on the shaft
      €6.101 pcs
    • Bore snap ring Ø19CT SEG 19 W by 1000Why it fits: DIN 472 snap ring for a 19 bore: holds the outer ring in the housing
      €10.711 pcs
    • Seal 10×19JULU 010-19-7 TCWhy it fits: Oil seal 10×19: shaft 10 and housing bore 19, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.17825 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 19d 10B 5
    d×D×Bsize 10 × 19 × 5mm

    Deep groove ball bearing 6800-ZZ, design ZZ: metal shields on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet