+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6206DDUC3E D EEMS5 · 30 × 62 × 16

Deep groove ball · 6206DDUC3E D EEMS5

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206DDUC3E D EEMS5: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206DDUC3E D EEMS5D
    Fig. 1: 6206DDUC3E D EEMS5, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6206DDUC3E D EEMS5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6206DDUC3E D EEMS5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    1 exact, 89 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    16 mm
    Width BRing width. Source: supplier data
    Seal
    Dcontact seal on one side
    Clearance
    C3
    01

    Equivalents

    the same size 30 × 62 × 16 from other brands

    90 products
    Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm
    You are viewingNSK 6206DDUC3E D EEMS5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designCT30 × 62 × 1610,167 pcs€1.05
    • Series illustration (not a photo of this item): 6206 2RS C36206 2RS C3contact seals on both sides, standard designCT30 × 62 × 1680 pcs€1.11
    • Series illustration (not a photo of this item): 6206 2RSC36206 2RSC3contact seals on both sides, standard designNTE30 × 62 × 163,307 pcs€1.44
    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designNTE30 × 62 × 165,683 pcs€1.51
    • Drawing: SS 6206 2RSSS 6206 2RScontact seals on both sides, normal clearance, stainless steelCT30 × 62 × 16237 pcs€4.21
    • Series illustration (not a photo of this item): 6206 2NSE C36206 2NSE C3contact seals on both sides, standard designNACHI30 × 62 × 1642 pcs€4.63
    • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designKoyo30 × 62 × 16349 pcs€5.55
    • Drawing: 6206 LLUC3/5K6206 LLUC3/5Kcontact seals on both sides, 5KNTN30 × 62 × 1637 pcs€6.63
    • Type diagram, no dimensions: ball6206 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN30 × 62 × ?40 pcs€6.63
    • Series illustration (not a photo of this item): 6206 2NSE NR6206 2NSE NRcontact seals on both sides, normal clearance, groove and snap ringNACHI30 × 62 × 1648 pcs€7.01
    02

    Often bought with this

    shaft snap ring Ø30, bore snap ring Ø62, seal 30×62

    5 products
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    • Seal 30×62JULU 030-62-7 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.39480 pcs
    • Seal 30×62JULU 030-62-10 TCWhy it fits: Oil seal 30×62: shaft 30 and housing bore 62, the same as the bearing; the bearing has its own seals (D), and the oil seal closes the unit from outside
      €0.401,764 pcs
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    16 machines4 makesby parts catalogues

    1. VBP 2160 (baler) Kuhn check the version 3 assemblies · 11 pcs per machine

      ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: kuhn_vbp-2160

    2. Belarus-152 Belarus check the version 2 assemblies · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    3. KhTZ-2511, KhTZ-3510 KhTZ check the version 1 assembly · 3 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: Tractors KhTZ-2511 and KhTZ-3510. Operator’s manual 2511.00.001 RE

    4. Belarus 1221/​1221V (1221.2/​1221V.2/​1221.3/​1221V.3) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 1221/​1221V. 1221-0000010 KDS. Catalogue of parts and assembly units (RUE MTZ)

    5. Belarus 1222/​1222V (title page: 1523-0000010 KDS) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has A; ours does not; ours has clearance C3; the machine takes normal (CN); ours has E, EEMS, 5; not decoded: suffix of our number “DDUD”

      manufacturer’s catalogue: BELARUS 1222/​1222V. 1523-0000010 KDS. Catalogue of assembly units and parts, 2009 (RUE MTZ)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 62d 30B 16
    d×D×Bsize 30 × 62 × 16mm

    Deep groove ball bearing 6206-RS C3, design D: contact seal on one side.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet