+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6002CM 5 · 15 × 32 × 9

Deep groove ball · 6002CM 5

radial — mediumaxial — low, on both sides
    Drawing of 6002CM 5: ⌀15 × ⌀32 × 9 mm6002CM 5
    Fig. 1: 6002CM 5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6002CM 5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 6002CM 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 49 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    CM
    01

    Equivalents

    the same size 15 × 32 × 9 from other brands

    51 products
    Drawing: 6002CM 5
    You are viewingNSK 6002CM 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designCT15 × 32 × 96,089 pcs€0.28
    • Series illustration (not a photo of this item): 6002 2RS C36002 2RS C3contact seals on both sides, clearance C3, standard designCT15 × 32 × 950 pcs€0.39
    • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designNTE15 × 32 × 970 pcs€0.39
    • Drawing: SS 6002 2RSSS 6002 2RScontact seals on both sides, normal clearance, stainless steelCT15 × 32 × 93,984 pcs€1.08
    • Cross-section drawing to size: Deep groove ball, 15 × 32 × 9 mm6002-2NSE9contact seals on both sides, 9: not decodedNACHI15 × 32 × 9212 pcs€2.36
    • Series illustration (not a photo of this item): 6002 2RSR6002 2RSRcontact seals on both sides, normal clearance, standard designFAG15 × 32 × 9259 pcs€2.64
    • Series illustration (not a photo of this item): 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designKoyo15 × 32 × 9125 pcs€2.83
    • Series illustration (not a photo of this item): 6002 2RS C36002 2RS C3contact seals on both sides, clearance C3, standard designKoyo15 × 32 × 960 pcs€2.83
    • Photo: 6002-2RSH6002-2RSHcontact seals on both sides, normal clearance, standard designSKF15 × 32 × 93,255 pcs€3.11
    • Photo: 6002 2RS6002 2RScontact seals on both sides, normal clearance, standard designKLT15 × 32 × 9available to order€0.29
    02

    Often bought with this

    seal 15×32, shaft snap ring Ø15, bore snap ring Ø32

    4 products
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21170 pcs
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 9
    d×D×Bsize 15 × 32 × 9mm

    Deep groove ball bearing 6002. Under GOST the same bearing is designated 102.

    Frequently asked questions

    What is 102?

    It is the same bearing under GOST 3189-89: 102 corresponds to the ISO base 6002. Size 15 × 32 × 9 mm, a full equivalent of 6002.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet