+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.89 per piece.
SS 6002 2RS · 15 × 32 × 9

Deep groove ball · SS 6002 2RS

radial — mediumaxial — low, on both sides
    Drawing of SS 6002 2RS: ⌀15 × ⌀32 × 9 mmSS 6002 2RS2RS
    Fig. 1: SS 6002 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of SS 6002 2RS

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT SS 6002 2RS

    €1.08per piece incl. VAT
    In stock: 3,984 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    2 exact, 45 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    9 mm
    Width BRing width. Source: two supplier sources
    Seal
    2RSrubber, both sides
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 32 × 9 from other brands

    52 products
    Drawing: SS 6002 2RS
    You are viewingCT SS 6002 2RS
    €1.08baseline for the price comparison

    Everything the number specifies matches: series 60, 15 × 32 × 9 mm, contact seals on both sides, normal clearance, stainless steel. The codes in the number are read against the CT catalogue.

    • Drawing: SS 6002 2RSSS 6002 2RSThis bearingCT15 × 32 × 93,984 pcs€1.08you are here
    • Drawing: 6002 2RS SS6002 2RS SSno brand15 × 32 × 9available to orderon request

    Under the price: the difference from the price of this bearing (€1.08).
    02

    Often bought with this

    shaft snap ring Ø15, bore snap ring Ø32, seal 15×32

    4 products
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing; the bearing has its own seals (2RS), and the oil seal closes the unit from outside
      €0.21170 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 9
    d×D×Bsize 15 × 32 × 9mm

    Deep groove ball bearing 6002-2RS SS, design 2RS: contact seals on both sides.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Will 6002 2RS C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet