+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16009 5 · 45 × 75 × 10

Deep groove ball · 16009 5

radial — mediumaxial — low, on both sides
    Drawing of 16009 5: ⌀45 × ⌀75 × 10 mm16009 5
    Fig. 1: 16009 5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16009 5

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NSK 16009 5

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 5 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    10 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 45 × 75 × 10 from other brands

    6 products
    Drawing: 16009 5
    You are viewingNSK 16009 5

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 1600916009standard designCT45 × 75 × 10443 pcs€1.26
    • Photo: 1600916009standard designDKF45 × 75 × 10available to order€7.26
    • Photo: 1600916009standard designFAG45 × 75 × 10available to order€14.40
    • Drawing: 16009 ZZ16009 ZZmetal shields on both sides, standard designMGK45 × 75 × 10available to orderon request
    • Cross-section drawing to size: Deep groove ball, 45 × 75 × 10 mmS 16009 2RScontact seals on both sides, S: not decodedZEN45 × 75 × 10available to orderon request
    02

    Often bought with this

    seal 45×75, shaft snap ring Ø45, bore snap ring Ø75

    4 products
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.57available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 75d 45B 10
    d×D×Bsize 45 × 75 × 10mm

    Deep groove ball bearing 16009. Under GOST the same bearing is designated 7000109.

    Frequently asked questions

    What is 7000109?

    It is the same bearing under GOST 3189-89: 7000109 corresponds to the ISO base 16009. Size 45 × 75 × 10 mm, a full equivalent of 16009.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet