+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €1.04 per piece.
16009 · 45 × 75 × 10

Deep groove ball · 16009

radial — mediumaxial — low, on both sides
    Drawing of 16009: ⌀45 × ⌀75 × 10 mm16009
    Fig. 1: 16009, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16009

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16009

    €1.26per piece incl. VAT
    In stock: 443 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    3 exact, 3 approximate
    d
    45 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    75 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    10 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    16.5 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    10.8 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.17 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 45 × 75 × 10 from other brands

    6 products
    Series illustration (not a photo of this item): 16009
    You are viewingCT 16009
    €1.26baseline for the price comparison

    Everything the number specifies matches: series 160, 45 × 75 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1600916009This bearingCT45 × 75 × 10443 pcs€1.26you are here
    • Photo: 1600916009DKF45 × 75 × 10available to order€7.26+€6
    • Photo: 1600916009FAG45 × 75 × 10available to order€14.40+€13.14

    Under the price: the difference from the price of this bearing (€1.26).
    02

    Often bought with this

    seal 45×75, shaft snap ring Ø45, bore snap ring Ø75

    4 products
    • Seal 45×75JULU 045-75-10 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.50480 pcs
    • Seal 45×75JULU 045-75-8 TCWhy it fits: Oil seal 45×75: shaft 45 and housing bore 75, the same as the bearing
      €0.57available to order
    • Shaft snap ring Ø45CT SEG 45 Z by 1000Why it fits: DIN 471 snap ring for a 45 shaft: holds the inner ring on the shaft
      €77.63available to order
    • Bore snap ring Ø75CT SEG 75 W by 100Why it fits: DIN 472 snap ring for a 75 bore: holds the outer ring in the housing
      €19.77available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    D 75d 45B 10
    d×D×Bsize 45 × 75 × 10mm
    Cdynamic 16.5kN
    C0static 10.8kN
    mweight 0.17kg

    Deep groove ball bearing 16009. Under GOST the same bearing is designated 7000109.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000109?

    It is the same bearing under GOST 3189-89: 7000109 corresponds to the ISO base 16009. Size 45 × 75 × 10 mm, a full equivalent of 16009.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet