+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
9008745103216 16006 · 30 × 55 × 9

Deep groove ball · 9008745103216 16006 · simplified: protection (shields, seals); bore (cylindrical or K), not given in the designation

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 9008745103216 16006: ⌀30 × ⌀55 × 9 mm⌀55⌀3099008745103216 16006
    Fig. 1: 9008745103216 16006, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 9008745103216 16006

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing NKE 9008745103216 16006

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    5 exact, 8 approximate
    d
    30 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    55 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    9 mm
    Width BRing width. Source: supplier data
    01

    Equivalents

    the same size 30 × 55 × 9 from other brands

    15 products
    Cross-section drawing to size: Deep groove ball, 30 × 55 × 9 mm
    You are viewingNKE 9008745103216 16006

    Everything the number specifies matches: series 160, 30 × 55 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NKE catalogue.

    • Series illustration (not a photo of this item): 1600616006CT30 × 55 × 9available to order€0.87
    • Series illustration (not a photo of this item): 1600616006KG30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006NEU30 × 55 × 9out of stockon request
    • Series illustration (not a photo of this item): 1600616006NTE30 × 55 × 9available to orderon request
    • Series illustration (not a photo of this item): 1600616006SKF30 × 55 × 9available to orderon request
    02

    Often bought with this

    seal 30×55, shaft snap ring Ø30, bore snap ring Ø55

    5 products
    • Seal 30×55JULU 030-55-10 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.39870 pcs
    • Seal 30×55JULU 030-55-7 TCWhy it fits: Oil seal 30×55: shaft 30 and housing bore 55, the same as the bearing
      €0.40180 pcs
    • Shaft snap ring Ø30CT SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €54.162 pcs
    • Shaft snap ring Ø30SEG 30 Z by 1000Why it fits: DIN 471 snap ring for a 30 shaft: holds the inner ring on the shaft
      €49.44available to order
    • Bore snap ring Ø55CT SEG 55 W by 1000Why it fits: DIN 472 snap ring for a 55 bore: holds the outer ring in the housing
      €90.59available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    1 machine1 makeby parts catalogues

    1. Belarus-152 Belarus check the version 1 assembly · 1 pcs per machine

      the machine has S1; ours does not; not decoded: mark “K” in the machine catalogue

      manufacturer’s catalogue: BELARUS-152. 152-0000010 KDS. Catalogue of assembly units and parts (OJSC MTZ, 2016)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    D 55d 30B 9
    d×D×Bsize 30 × 55 × 9mm

    Deep groove ball bearing 9008745103216 16006.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet