+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KLT
51115 · 75 × 100 × 19

Thrust ball · 51115

axial — medium, on one side
    Drawing of 51115: ⌀75 × ⌀100 × 19 mm⌀100⌀751951115
    Fig. 1: 51115, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing KLT 51115 — photo 1
    Bearing KLT 51115 — photo 2
    Bearing KLT 51115 — photo 3
    Load: no radial load; axial medium, on one sideThrust ball

    Bearing KLT 51115

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 1 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    H
    19 mm
    Height HMounting height: the distance between the seating faces of the washers of an assembled thrust bearing (ISO 104). Source: two supplier sources
    m
    0.4 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 100 × 19 from other brands

    6 products
    Photo: 51115
    You are viewingKLT 51115

    Everything the number specifies matches: series 511, 75 × 100 × 19 mm, ordinary steel, design without special letters. The codes in the number are read against the KLT catalogue.

    • Photo: 5111551115This bearingKLT75 × 100 × 19out of stockon requestyou are here
    • Series illustration (not a photo of this item): 5111551115CT75 × 100 × 1937 pcs€2.96
    • Photo: 5111551115Z&S75 × 100 × 19available to order€6.90
    • Series illustration (not a photo of this item): 5111551115KG75 × 100 × 19available to orderon request
    • Series illustration (not a photo of this item): 5111551115SKF75 × 100 × 19available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Hsize 75 × 100 × 19mm
    mweight 0.4kg

    Thrust ball bearing 51115. Under GOST the same bearing is designated 8115.

    M: KLT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 8115?

    It is the same bearing under GOST 3189-89: 8115 corresponds to the ISO base 51115. Size 75 × 100 × 19 mm, a full equivalent of 51115.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet