+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
51115 · 75 × 100 × 19

Thrust ball · 51115

axial — medium, on one side
    Drawing of 51115: ⌀75 × ⌀100 × 19 mm⌀100⌀751951115
    Fig. 1: 51115, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 51115

    Load: no radial load; axial medium, on one sideThrust ball

    Bearing KG 51115

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    5 exact, 1 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    100 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    H
    19 mm
    Height HMounting height: the distance between the seating faces of the washers of an assembled thrust bearing (ISO 104). Source: supplier data
    01

    Equivalents

    the same size 75 × 100 × 19 from other brands

    6 products
    Series illustration (not a photo of this item): 51115
    You are viewingKG 51115

    Everything the number specifies matches: series 511, 75 × 100 × 19 mm, ordinary steel, design without special letters. The codes in the number are read against the KG catalogue.

    • Series illustration (not a photo of this item): 5111551115This bearingKG75 × 100 × 19available to orderon requestyou are here
    • Series illustration (not a photo of this item): 5111551115CT75 × 100 × 1937 pcs€2.96
    • Photo: 5111551115Z&S75 × 100 × 19available to order€6.90
    • Photo: 5111551115KLT75 × 100 × 19out of stockon request
    • Series illustration (not a photo of this item): 5111551115SKF75 × 100 × 19available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Hsize 75 × 100 × 19mm

    Thrust ball bearing 51115. Under GOST the same bearing is designated 8115.

    Frequently asked questions

    What is 8115?

    It is the same bearing under GOST 3189-89: 8115 corresponds to the ISO base 51115. Size 75 × 100 × 19 mm, a full equivalent of 51115.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet