+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
NJ317 E · 85 × 180 × 41

Cylindrical roller · NJ317 E

radial — highaxial — low, on one side
    Drawing of NJ317 E: ⌀85 × ⌀180 × 41 mm⌀180⌀8541NJ317 E
    Fig. 1: NJ317 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ317 E

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing KG NJ317 E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 25 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    41 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 85 × 180 × 41 from other brands

    26 products
    Series illustration (not a photo of this item): NJ317 E
    You are viewingKG NJ317 E

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 317 ENU 317 Edifferent designCT85 × 180 × 4122 pcs€30.52
    • Series illustration (not a photo of this item): NU317J PQNU317J PQJ, PQ: not decodedNTE85 × 180 × 417 pcs€43.52
    • Series illustration (not a photo of this item): N 317N 317different designCT85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): N317 MN317 MMCT85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): N317EMN317EME, MDYZV85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): N 317 E-XL-M1-C3N 317 E-XL-M1-C3clearance C3, E, M1, XLFAG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): N317-E-XL-M1N317-E-XL-M1E, M1, XLFAG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): NJ317 -E-M1NJ317 -E-M1E, M1FAG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): NU 317 E M1 C3NU 317 E M1 C3clearance C3, E, M1FAG85 × 180 × 41available to orderon request
    • Series illustration (not a photo of this item): NU 317 E-XL-TVP2NU 317 E-XL-TVP2E, TVP2, XLFAG85 × 180 × 41available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 85 × 180 × 41mm

    Cylindrical roller NJ bearing NJ317 E.

    Frequently asked questions

    Will 317 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet