+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €25.22 per piece.
NU 317 E · 85 × 180 × 41

Cylindrical roller · NU 317 E

radial — high
    Drawing of NU 317 E: ⌀85 × ⌀180 × 41 mm⌀180⌀8541NU 317 E
    Fig. 1: NU 317 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NU 317 E

    Load: radial high; no axial loadCylindrical roller NU

    Bearing CT NU 317 E

    €30.52per piece incl. VAT
    In stock: 22 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 23 approximate
    d
    85 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    180 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    41 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    340 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 85 × 180 × 41 from other brands

    26 products
    Series illustration (not a photo of this item): NU 317 E
    You are viewingCT NU 317 E
    €30.52baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): NU 317 ENU 317 EThis bearingCT85 × 180 × 4122 pcs€30.52you are here
    • Series illustration (not a photo of this item): NU317ENU317ENTE85 × 180 × 41available to orderon request

    Under the price: the difference from the price of this bearing (€30.52).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 85 × 180 × 41mm
    Cdynamic 340kN

    Cylindrical roller NU bearing NU 317 E.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 317 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet