+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
KG
1213 K · 65 × 120 × 23

Self-aligning ball · 1213 K

radial — mediumaxial — low, on both sides
    Drawing of 1213 K: ⌀65 × ⌀120 × 23 mm⌀120⌀65231213 K
    Fig. 1: 1213 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1213 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing KG 1213 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 11 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    23 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 65 × 120 × 23 from other brands

    15 products
    Series illustration (not a photo of this item): 1213 K
    You are viewingKG 1213 K

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 12131213standard designCT65 × 120 × 238 pcs€5.76
    • Photo: 12131213standard designGPZ65 × 120 × 23available to order€20.21
    • Series illustration (not a photo of this item): 12131213standard designno brand65 × 120 × 23available to orderon request
    • Series illustration (not a photo of this item): 12131213standard designKG65 × 120 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 23 mm1213 55NSK65 × 120 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 23 mm1213 EKTN9different cage, E, 1:12 tapered boreSKF65 × 120 × 23available to orderon request
    • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 23 mm1213 EKTN9/C3clearance C3, different cage, E, 1:12 tapered boreSKF65 × 120 × 23available to orderon request
    • Series illustration (not a photo of this item): 1213 ETN91213 ETN9different cage, ESKF65 × 120 × 23available to orderon request
    • Series illustration (not a photo of this item): 1213 ETN9/C31213 ETN9/C3clearance C3, different cage, ESKF65 × 120 × 23available to orderon request
    • Series illustration (not a photo of this item): 1213 K/C31213 K/C3clearance C3NKE65 × 120 × 23available to orderon request
    02

    Often bought with this

    adapter sleeve H213, lock nut M65×2, lock washer MB13, bore snap ring Ø120

    7 products
    • Adapter sleeve H213CT H 213Why it fits: H213 for 1213 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      €2.3190 pcs
    • Adapter sleeve H213H 213Why it fits: H213 for 1213 K: 1:12 taper, bore 65 for shaft 60 (Koyo, p. 65)
      Price to be confirmedavailable to order
    • Lock nut M65×2CT KM 13Why it fits: KM13 is the nut for sleeve H213: thread M65×2
      €1.59395 pcs
    • Lock nut M65×2IBU KM 13Why it fits: KM13 is the nut for sleeve H213: thread M65×2
      Price to be confirmedavailable to order
    • Lock washer MB13CT MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      €0.36740 pcs
    • Lock washer MB13IBU MB 13Why it fits: MB13 locks the KM13 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 120 × 23mm

    Self-aligning ball bearing 1213 K. Under GOST the same bearing is designated 111213.

    Frequently asked questions

    What is 111213?

    It is the same bearing under GOST 3189-89: 111213 corresponds to the ISO base 1213 K. Size 65 × 120 × 23 mm, a full equivalent of 1213 K.

    Will 1213 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet