+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.76 per piece.
1213 · 65 × 120 × 23

Self-aligning ball · 1213

radial — mediumaxial — low, on both sides
    Drawing of 1213: ⌀65 × ⌀120 × 23 mm⌀120⌀65231213
    Fig. 1: 1213, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1213

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing CT 1213

    €5.76per piece incl. VAT
    In stock: 8 pcs
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    4 exact, 9 approximate
    d
    65 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    120 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    23 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    35.1 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    14 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.1 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 65 × 120 × 23 from other brands

    13 products
    Series illustration (not a photo of this item): 1213
    You are viewingCT 1213
    €5.76baseline for the price comparison

    Everything the number specifies matches: series 12, 65 × 120 × 23 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 12131213This bearingCT65 × 120 × 238 pcs€5.76you are here
    • Photo: 12131213GPZ65 × 120 × 23available to order€20.21+€14.45
    • Series illustration (not a photo of this item): 12131213no brand65 × 120 × 23available to orderon request
    • Series illustration (not a photo of this item): 12131213KG65 × 120 × 23available to orderon request

    Under the price: the difference from the price of this bearing (€5.76).
    02

    Often bought with this

    seal 65×120, shaft snap ring Ø65, bore snap ring Ø120

    5 products
    • Seal 65×120JULU 065-120-10 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23270 pcs
    • Seal 65×120JULU 065-120-12 TCWhy it fits: Oil seal 65×120: shaft 65 and housing bore 120, the same as the bearing
      €1.23available to order
    • Shaft snap ring Ø65CT SEG 65 Z by1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      €177.91available to order
    • Shaft snap ring Ø65SEG 65 Z by 1000Why it fits: DIN 471 snap ring for a 65 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø120CT SEG 120 W by 100Why it fits: DIN 472 snap ring for a 120 bore: holds the outer ring in the housing
      €65.88available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 65 × 120 × 23mm
    Cdynamic 35.1kN
    C0static 14kN
    mweight 1.1kg

    Self-aligning ball bearing 1213. Under GOST the same bearing is designated 1213.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1213?

    It is the same bearing under GOST 3189-89: 1213 corresponds to the ISO base 1213. Size 65 × 120 × 23 mm, a full equivalent of 1213.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet