+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
GPZ
NJ 315 · 75 × 160 × 37

Cylindrical roller · NJ 315

radial — highaxial — low, on one side
    Drawing of NJ 315: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NJ 315
    Fig. 1: NJ 315, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 315

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing GPZ NJ 315

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    OEM number
    75 RJ 03
    Equivalents
    3 exact, 22 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    37 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    3.35 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    26 products
    Series illustration (not a photo of this item): NJ 315
    You are viewingGPZ NJ 315

    Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

    • Series illustration (not a photo of this item): NJ 315NJ 315This bearingGPZ75 × 160 × 37out of stockon requestyou are here
    • Series illustration (not a photo of this item): NJ 315NJ 315CT75 × 160 × 37available to order€17.88
    • Series illustration (not a photo of this item): NJ 315 ENJ 315 ENTE75 × 160 × 37available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus check the version 1 assembly · 2 pcs per machine

      the machine has M; ours does not; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 75 × 160 × 37mm
    mweight 3.35kg

    Cylindrical roller NJ bearing NJ 315.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 315 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet