+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 315 E · 75 × 160 × 37

Cylindrical roller · NJ 315 E

radial — highaxial — low, on one side
    Drawing of NJ 315 E: ⌀75 × ⌀160 × 37 mm⌀160⌀7537NJ 315 E
    Fig. 1: NJ 315 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 315 E

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing NTE NJ 315 E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 23 approximate
    d
    75 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    37 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    280 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    265 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3.35 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 75 × 160 × 37 from other brands

    26 products
    Series illustration (not a photo of this item): NJ 315 E
    You are viewingNTE NJ 315 E

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): N315J PQN315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€32.15
    • Series illustration (not a photo of this item): NJ315J PQNJ315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€32.15
    • Series illustration (not a photo of this item): NU315J PQNU315J PQJ, PQ: not decodedNTE75 × 160 × 3710 pcs€32.15
    • Photo: NU 315NU 315different designGPZ75 × 160 × 37available to order€34.49
    • Photo: NUP 315 ENUP 315 Edifferent designURB75 × 160 × 37available to order€79.64
    • Series illustration (not a photo of this item): NU 315NU 315different designCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): N 315N 315different designCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): NF315NF315different designCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): NU 315 ENU 315 Edifferent designCT75 × 160 × 37available to orderon request
    • Series illustration (not a photo of this item): N315EMN315EME, MDYZV75 × 160 × 37available to orderon request
    02

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 2 pcs per machine

      the machine has M; ours does not; ours has E; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus check the version 1 assembly · 2 pcs per machine

      the machine has M; ours does not; ours has E; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, clearance, precision class

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 75 × 160 × 37mm
    Cdynamic 280kN
    C0static 265kN
    mweight 3.35kg

    Cylindrical roller NJ bearing NJ 315 E.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 315 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    By make and unit

    this bearing is fitted in machines of these makes

    04

    Reviews

    No reviews yet