+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €35.00 per piece.
GPZ
1316 MK · 80 × 170 × 39

Self-aligning ball · 1316 MK

radial — mediumaxial — low, on both sides
    Drawing of 1316 MK: ⌀80 × ⌀170 × 39 mm⌀170⌀80391316 MK
    Fig. 1: 1316 MK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
    Bearing GPZ 1316 MK — photo 1
    Bearing GPZ 1316 MK — photo 2
    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing GPZ 1316 MK

    €42.35per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    3 exact, 8 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    39 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    4.2 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    14 products
    Photo: 1316 MK
    You are viewingGPZ 1316 MK
    €42.35baseline for the price comparison

    Everything the number specifies matches: series 13, 80 × 170 × 39 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the GPZ catalogue.

    • Photo: 1316 MK1316 MKThis bearingGPZ80 × 170 × 39available to order€42.35you are here
    • Series illustration (not a photo of this item): 1316 K1316 KKBS80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 1316 K1316 KSKF80 × 170 × 39available to orderon request

    Under the price: the difference from the price of this bearing (€42.35).
    02

    Often bought with this

    adapter sleeve H316, lock nut M80×2, lock washer MB16

    6 products
    • Adapter sleeve H316CT H 316Why it fits: H316 for 1316 K: 1:12 taper, bore 80 for shaft 70 (Koyo, p. 65)
      €6.03268 pcs
    • Adapter sleeve H316CT H 316 with black KMWhy it fits: H316 for 1316 K: 1:12 taper, bore 80 for shaft 70 (Koyo, p. 65)
      €5.25available to order
    • Lock nut M80×2CT KM 16 SILVERWhy it fits: KM16 is the nut for sleeve H316: thread M80×2
      €2.581,380 pcs
    • Lock nut M80×2FAG KM 16Why it fits: KM16 is the nut for sleeve H316: thread M80×2
      Price to be confirmedavailable to order
    • Lock washer MB16CT MB 16Why it fits: MB16 locks the KM16 nut (ISO 2982-2)
      €0.571,699 pcs
    • Lock washer MB16FAG MB 16Why it fits: MB16 locks the KM16 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 39mm
    mweight 4.2kg

    Self-aligning ball bearing 1316 K. Under GOST the same bearing is designated 111316.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111316?

    It is the same bearing under GOST 3189-89: 111316 corresponds to the ISO base 1316 K. Size 80 × 170 × 39 mm, a full equivalent of 1316 K.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet