+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
1316 K · 80 × 170 × 39

Self-aligning ball · 1316 K

radial — mediumaxial — low, on both sides
    Drawing of 1316 K: ⌀80 × ⌀170 × 39 mm⌀170⌀80391316 K
    Fig. 1: 1316 K, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1316 K

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing SKF 1316 K

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    2 exact, 9 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    88.4 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    14 products
    Series illustration (not a photo of this item): 1316 K
    You are viewingSKF 1316 K

    Everything the number specifies matches: series 13, 80 × 170 × 39 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

    • Series illustration (not a photo of this item): 1316 K1316 KThis bearingSKF80 × 170 × 39available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1316 K1316 KKBS80 × 170 × 39available to orderon request
    02

    Often bought with this

    adapter sleeve H316, lock nut M80×2, lock washer MB16

    6 products
    • Adapter sleeve H316CT H 316Why it fits: H316 for 1316 K: 1:12 taper, bore 80 for shaft 70 (Koyo, p. 65)
      €6.03268 pcs
    • Adapter sleeve H316CT H 316 with black KMWhy it fits: H316 for 1316 K: 1:12 taper, bore 80 for shaft 70 (Koyo, p. 65)
      €5.25available to order
    • Lock nut M80×2CT KM 16 SILVERWhy it fits: KM16 is the nut for sleeve H316: thread M80×2
      €2.581,380 pcs
    • Lock nut M80×2FAG KM 16Why it fits: KM16 is the nut for sleeve H316: thread M80×2
      Price to be confirmedavailable to order
    • Lock washer MB16CT MB 16Why it fits: MB16 locks the KM16 nut (ISO 2982-2)
      €0.571,699 pcs
    • Lock washer MB16FAG MB 16Why it fits: MB16 locks the KM16 nut (ISO 2982-2)
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 170 × 39mm
    Cdynamic 88.4kN

    Self-aligning ball bearing 1316 K. Under GOST the same bearing is designated 111316.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 111316?

    It is the same bearing under GOST 3189-89: 111316 corresponds to the ISO base 1316 K. Size 80 × 170 × 39 mm, a full equivalent of 1316 K.

    Will 1316 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet