+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 412-XL-M1A-C3 · 60 × 150 × 35

Cylindrical roller · NJ 412-XL-M1A-C3

radial — highaxial — low, on one side
    Drawing of NJ 412-XL-M1A-C3: ⌀60 × ⌀150 × 35 mm⌀150⌀6035NJ 412-XL-M1A-C3
    Fig. 1: NJ 412-XL-M1A-C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 412-XL-M1A-C3

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing FAG NJ 412-XL-M1A-C3

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    0 exact, 4 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    35 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    C3
    01

    Equivalents

    the same size 60 × 150 × 35 from other brands

    5 products
    Series illustration (not a photo of this item): NJ 412-XL-M1A-C3
    You are viewingFAG NJ 412-XL-M1A-C3

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 412 MNJ 412 Mnormal clearance, MCT60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NUP412 MNUP412 Mnormal clearance, MCT60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NU412M P6 PQNU412M P6 PQprecision class P6, M, PQ: not decodedNTE60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NUP412NUP412normal clearanceCT60 × 150 × 35available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    Where this bearing is fitted

    2 machines1 makeby parts catalogues

    1. Belarus 80/​82 (80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P) Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; ours has clearance C3; the machine takes normal (CN); ours has XL, M1A; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, precision class

      manufacturer’s catalogue: BELARUS 80.1/​80.3/​80U/​82U/​82.1/​820/​82.3/​82R/​82P. 80-0000010 KDS. Catalogue of parts and assembly units, ed. 10 (RUE MTZ)

    2. Belarus-80Kh/​80Kh.1/​100Kh Belarus check the version 1 assembly · 4 pcs per machine

      the machine has M; ours does not; ours has clearance C3; the machine takes normal (CN); ours has XL, M1A; not decoded: mark “K” in the machine catalogue; not set by the number: sealing, precision class

      manufacturer’s catalogue: BELARUS-80Kh/​80Kh.1/​100Kh. 80Kh-0000010 KDS. Catalogue of assembly units and parts (RUE MTZ, 2012)

    Number in the manufacturer’s catalogue: by ISO. “Same geometry” means size and type match; the version is not given in the catalogue.

    About the bearing

    d×D×Bsize 60 × 150 × 35mm

    Cylindrical roller NJ bearing NJ 412-XL-M1A-C3.

    Frequently asked questions

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    By make and unit

    this bearing is fitted in machines of these makes

    05

    Reviews

    No reviews yet