+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NUP412 · 60 × 150 × 35

Cylindrical roller · NUP412

radial — highaxial — low, on both sides
    Drawing of NUP412: ⌀60 × ⌀150 × 35 mm⌀150⌀6035NUP412
    Fig. 1: NUP412, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NUP412

    Load: radial high; axial low, on both sidesCylindrical roller NUP

    Bearing CT NUP412

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    0 exact, 3 approximate
    d
    60 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    150 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    35 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 60 × 150 × 35 from other brands

    5 products
    Series illustration (not a photo of this item): NUP412
    You are viewingCT NUP412

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 412 MNJ 412 Mdifferent designCT60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NU412M P6 PQNU412M P6 PQprecision class P6, PQ: not decodedNTE60 × 150 × 35available to orderon request
    • Series illustration (not a photo of this item): NJ 412-XL-M1A-C3NJ 412-XL-M1A-C3clearance C3FAG60 × 150 × 35available to orderon request
    02

    Often bought with this

    shaft snap ring Ø60, bore snap ring Ø150

    2 products
    • Shaft snap ring Ø60CT SEG 60 Z by1000Why it fits: DIN 471 snap ring for a 60 shaft: holds the inner ring on the shaft
      €132.24out of stock
    • Bore snap ring Ø150CT SEG 150 W by 100Why it fits: DIN 472 snap ring for a 150 bore: holds the outer ring in the housing
      €86.47available to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 60 × 150 × 35mm

    Cylindrical roller NUP bearing NUP412.

    Frequently asked questions

    Will 412 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet