+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 216 E · 80 × 140 × 26

Cylindrical roller · NJ216E

radial — highaxial — low, on one side
    Drawing of NJ216E: ⌀80 × ⌀140 × 26 mm⌀140⌀8026NJ216E
    Fig. 1: NJ216E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 216 E

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing NTE NJ 216 E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    2 exact, 14 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    140 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    26 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    160 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    166 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    1.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 140 × 26 from other brands

    19 products
    Series illustration (not a photo of this item): NJ216E
    You are viewingNTE NJ 216 E

    Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

    • Series illustration (not a photo of this item): NJ216ENJ216EThis bearingNTE80 × 140 × 26available to orderon requestyou are here
    • Photo: NJ 216 ENJ 216 EZ&S80 × 140 × 26available to order€24.54
    02

    Often bought with this

    seal 80×140

    1 product
    • Seal 80×140JULU 080-140-13 TCWhy it fits: Oil seal 80×140: shaft 80 and housing bore 140, the same as the bearing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 80 × 140 × 26mm
    Cdynamic 160kN
    C0static 166kN
    mweight 1.6kg

    Cylindrical roller NJ bearing NJ216E.

    C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 216 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet