+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NF 218 E · 90 × 160 × 30

Cylindrical roller · NF 218 E

radial — high
    Drawing of NF 218 E: ⌀90 × ⌀160 × 30 mm⌀160⌀9030NF 218 E
    Fig. 1: NF 218 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NF 218 E

    Load: radial high; no axial loadCylindrical roller

    Bearing CT NF 218 E

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 16 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    30 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    152 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    17 products
    Series illustration (not a photo of this item): NF 218 E
    You are viewingCT NF 218 E

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NJ 218NJ 218different designCT90 × 160 × 3010 pcs€15.14
    • Series illustration (not a photo of this item): NJ218J PQNJ218J PQJ, PQ: not decodedNTE90 × 160 × 3020 pcs€26.78
    • Photo: NJ 218NJ 218different designGPZ90 × 160 × 30available to order€51.43
    • Series illustration (not a photo of this item): N218N218different designCT90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): NU 218 E TVP2NU 218 E TVP2E, TVP2FAG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): NU 218 E-XL-M1-F1-J20AA-C3NU 218 E-XL-M1-F1-J20AA-C3clearance C3, E, M1, XL, F1, J20AA: not decodedFAG90 × 160 × ?available to orderon request
    • Series illustration (not a photo of this item): NU 218-E-XL-N-MPAX-F59-C3NU 218-E-XL-N-MPAX-F59-C3clearance C3, E, MPA, XL, X, groove for a snap ring, F59: not decodedFAG90 × 160 × ?available to orderon request
    • Series illustration (not a photo of this item): NU 218NU 218different designKG90 × 160 × 30available to orderon request
    • Series illustration (not a photo of this item): NU218-E-MA6-C3NU218-E-MA6-C3clearance C3, E, MA, 6: not decodedNKE90 × 160 × ?available to orderon request
    • Series illustration (not a photo of this item): N218N218different designNTE90 × 160 × 30available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 30mm
    Cdynamic 152kN

    Cylindrical roller bearing NF 218 E.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet