+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €42.50 per piece.
GPZ
NJ 218 · 90 × 160 × 30

Cylindrical roller · NJ 218

radial — highaxial — low, on one side
    Drawing of NJ 218: ⌀90 × ⌀160 × 30 mm⌀160⌀9030NJ 218
    Fig. 1: NJ 218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 218

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing GPZ NJ 218

    €51.43per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    3 exact, 13 approximate
    d
    90 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    160 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    30 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    2.41 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 90 × 160 × 30 from other brands

    17 products
    Photo: NJ 218
    You are viewingGPZ NJ 218
    €51.43baseline for the price comparison

    Size and design match across the brand catalogues. The codes in the number are read against the GPZ catalogue.

    • Photo: NJ 218NJ 218This bearingGPZ90 × 160 × 30available to order€51.43you are here
    • Series illustration (not a photo of this item): NJ 218NJ 218CT90 × 160 × 3010 pcs€15.14−€36.29
    • Series illustration (not a photo of this item): NJ 218NJ 218NTE90 × 160 × 30available to orderon request

    Under the price: the difference from the price of this bearing (€51.43).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 90 × 160 × 30mm
    mweight 2.41kg

    Cylindrical roller NJ bearing NJ 218.

    M: GPZ data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 218 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet