+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
6316 Z · 80 × 170 × 39

Deep groove ball · 6316 Z

radial — mediumaxial — low, on both sides
    Simplified drawing of the bearing per ISO 8826-1, dimensions of 6316 Z: ⌀80 × ⌀170 × 39 mm⌀170⌀80396316 ZZ
    Fig. 1: 6316 Z, simplified drawing per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6316 Z

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 6316 Z

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 31 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    39 mm
    Width BRing width. Source: supplier data
    Seal
    Zshield, one side
    Clearance
    normal clearance
    C
    130 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    86.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3.6 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    32 products
    Series illustration (not a photo of this item): 6316 Z
    You are viewingCT 6316 Z

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 63166316open, no protectionNTE80 × 170 × 3910 pcs€22.22
    • Photo: 63166316open, no protectionFLT80 × 170 × 39available to order€52.56
    • Photo: 63166316open, no protectionSKF80 × 170 × 39available to order€81.59
    • Photo: 6316 C36316 C3open, no protection, clearance C3SKF80 × 170 × 39available to order€81.59
    • Series illustration (not a photo of this item): 63166316open, no protectionCT80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 6316 C36316 C3open, no protection, clearance C3CT80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316open, no protectionDYZV80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316open, no protectionFAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 6316 C36316 C3open, no protection, clearance C3FAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316open, no protectionKG80 × 170 × 39available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 80B 39
    d×D×Bsize 80 × 170 × 39mm
    Cdynamic 130kN
    C0static 86.5kN
    mweight 3.6kg

    Deep groove ball bearing 6316-Z, design Z: shield on one side. Under GOST the same bearing is designated 60316.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    What is 60316?

    It is the same bearing under GOST 3189-89: 6 — shield on one side, 0316 corresponds to the ISO base 6316. Size 80 × 170 × 39 mm, a full equivalent of 6316-Z.

    Will 6316 Z C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet