+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €67.43 per piece.
6316 · 80 × 170 × 39

Deep groove ball · 6316

radial — mediumaxial — low, on both sides
    Drawing of 6316: ⌀80 × ⌀170 × 39 mm6316
    Fig. 1: 6316, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 6316

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing SKF 6316

    €81.59per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    7 exact, 25 approximate
    d
    80 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    170 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    39 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C0
    86.5 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    3.8 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 80 × 170 × 39 from other brands

    32 products
    Photo: 6316
    You are viewingSKF 6316
    €81.59baseline for the price comparison

    Everything the number specifies matches: series 63, 80 × 170 × 39 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

    • Photo: 63166316This bearingSKF80 × 170 × 39available to order€81.59you are here
    • Series illustration (not a photo of this item): 63166316NTE80 × 170 × 3910 pcs€22.22−€59.37
    • Photo: 63166316FLT80 × 170 × 39available to order€52.56−€29.03
    • Series illustration (not a photo of this item): 63166316CT80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316DYZV80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316FAG80 × 170 × 39available to orderon request
    • Series illustration (not a photo of this item): 63166316KG80 × 170 × 39available to orderon request

    Under the price: the difference from the price of this bearing (€81.59).
    02

    Details

    what this bearing is, questions

    About the bearing

    D 170d 80B 39
    d×D×Bsize 80 × 170 × 39mm
    C0static 86.5kN
    mweight 3.8kg

    Deep groove ball bearing 6316. Under GOST the same bearing is designated 316.

    C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 316?

    It is the same bearing under GOST 3189-89: 316 corresponds to the ISO base 6316. Size 80 × 170 × 39 mm, a full equivalent of 6316.

    Will 6316 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet