+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
61807 · 35 × 47 × 7

Deep groove ball · 61807

radial — mediumaxial — low, on both sides
    Drawing of 61807: ⌀35 × ⌀47 × 7 mm61807
    Fig. 1: 61807, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 61807

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 61807

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    1 exact, 10 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    7 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    4.75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.03 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 47 × 7 from other brands

    11 products
    Series illustration (not a photo of this item): 61807
    You are viewingCT 61807

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 6807 / 61807 2RS6807 / 61807 2RScontact seals on both sidesCT35 × 47 × 7available to order€0.90
    • Series illustration (not a photo of this item): 61807 2RS61807 2RScontact seals on both sidesno brand35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 61807 2RS61807 2RScontact seals on both sidesCT35 × 47 × 7available to orderon request
    • Drawing: 6807DDCM NS7S56807DDCM NS7S5contact seals on both sides, clearance CM, 5, NS7SNSK35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 61807-2RS161807-2RS1contact seals on both sidesSKF35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 6807 / 61807 ZZ6807 / 61807 ZZmetal shields on both sidesCT35 × 47 × 7850 pcs€0.68
    • Photo: 61807 ZZ61807 ZZmetal shields on both sidesZ&S35 × 47 × 7available to order€2.57
    • Series illustration (not a photo of this item): 61807 ZZ61807 ZZmetal shields on both sidesno brand35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 6807 ZZ6807 ZZmetal shields on both sidesNSK35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 61807 ZZ61807 ZZmetal shields on both sidesNTE35 × 47 × 7available to orderon request
    02

    Often bought with this

    seal 35×47, shaft snap ring Ø35, bore snap ring Ø47

    5 products
    • Seal 35×47JULU 035-47-10 TCWhy it fits: Oil seal 35×47: shaft 35 and housing bore 47, the same as the bearing
      €0.31170 pcs
    • Seal 35×47JULU 035-47-7 TCWhy it fits: Oil seal 35×47: shaft 35 and housing bore 47, the same as the bearing
      €0.311,860 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 35B 7
    d×D×Bsize 35 × 47 × 7mm
    Cdynamic 4.75kN
    C0static 3.2kN
    mweight 0.03kg

    Deep groove ball bearing 61807. Under GOST the same bearing is designated 1000807.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1000807?

    It is the same bearing under GOST 3189-89: 1000807 corresponds to the ISO base 61807. Size 35 × 47 × 7 mm, a full equivalent of 61807.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet