+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €2.12 per piece.
61807 ZZ · 35 × 47 × 7

Deep groove ball · 61807 ZZ

radial — mediumaxial — low, on both sides
    Drawing of 61807 ZZ: ⌀35 × ⌀47 × 7 mm61807 ZZZZ
    Fig. 1: 61807 ZZ, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
    Bearing Z&S 61807 ZZ — photo 1
    Bearing Z&S 61807 ZZ — photo 2
    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing Z&S 61807 ZZ

    €2.57per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    Equivalents
    5 exact, 6 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    47 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    7 mm
    Width BRing width. Source: two supplier sources
    Seal
    ZZshields, both sides
    Clearance
    normal clearance
    C
    4.75 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    3.2 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    Limiting speed
    16,000 rpm
    Limiting speedMechanical limit; depends on the seal (SKF 6200: 36,000 open, 17,000 with 2RSH). Source: supplier data
    m
    0.027 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 47 × 7 from other brands

    11 products
    Photo: 61807 ZZ
    You are viewingZ&S 61807 ZZ
    €2.57baseline for the price comparison

    Everything the number specifies matches: series 618, 35 × 47 × 7 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 61807 ZZ61807 ZZThis bearingZ&S35 × 47 × 7available to order€2.57you are here
    • Series illustration (not a photo of this item): 6807 / 61807 ZZ6807 / 61807 ZZCT35 × 47 × 7850 pcs€0.68−€1.89
    • Series illustration (not a photo of this item): 61807 ZZ61807 ZZno brand35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 6807 ZZ6807 ZZNSK35 × 47 × 7available to orderon request
    • Series illustration (not a photo of this item): 61807 ZZ61807 ZZNTE35 × 47 × 7available to orderon request

    Under the price: the difference from the price of this bearing (€2.57).
    02

    Often bought with this

    shaft snap ring Ø35, bore snap ring Ø47, seal 35×47

    5 products
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø47CT SEG 47 W by 1000Why it fits: DIN 472 snap ring for a 47 bore: holds the outer ring in the housing
      €90.2811 pcs
    • Seal 35×47JULU 035-47-10 TCWhy it fits: Oil seal 35×47: shaft 35 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.31170 pcs
    • Seal 35×47JULU 035-47-7 TCWhy it fits: Oil seal 35×47: shaft 35 and housing bore 47, the same as the bearing; the bearing has its own seals (ZZ), and the oil seal closes the unit from outside
      €0.311,860 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    D 47d 35B 7
    d×D×Bsize 35 × 47 × 7mm
    Cdynamic 4.75kN
    C0static 3.2kN
    mweight 0.027kg

    Deep groove ball bearing 61807-ZZ, design ZZ: metal shields on both sides.

    C, C₀, m and limiting speed 16,000 rpm: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    How does 2RS differ from ZZ?

    2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet