+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €68.10 per piece.
22228 CA/W33 · 140 × 250 × 68

Spherical roller · 22228 CA/W33

radial — highaxial — medium, on both sides
    Drawing of 22228 CA/W33: ⌀140 × ⌀250 × 68 mm⌀250⌀1406822228 CA/W33
    Fig. 1: 22228 CA/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22228 CA/W33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing CT 22228 CA/W33

    €82.40per piece incl. VAT
    In stock: 15 pcs
    In the cart

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    1 exact, 19 approximate
    d
    140 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    250 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    68 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    628 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 140 × 250 × 68 from other brands

    20 products
    Series illustration (not a photo of this item): 22228 CA/W33
    You are viewingCT 22228 CA/W33
    €82.40baseline for the price comparison

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): 22228 CW33 PQ22228 CW33 PQCW33, PQ: not decodedNTE140 × 250 × 6810 pcs€171.51+€89.11
    • Photo: 22228 CCK/W3322228 CCK/W33lubrication groove and holes, pressed cage, 1:12 tapered boreSKF140 × 250 × 68available to order€623.16+€540.76
    • Series illustration (not a photo of this item): 22228 MW3322228 MW33M, lubrication groove and holesno brand140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228 CW3322228 CW33CW33CT140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228 KMBW3322228 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT140 × 250 × 68available to orderon request
    • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 KMBW33+H3128MB, lubrication groove and holes, 1:12 tapered bore, H3128: not decodedCT140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228MBW3322228MBW33MB, lubrication groove and holesDYZV140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228 E1-XL-K-C422228 E1-XL-K-C4clearance C4, E1, XL, 1:12 tapered boreFAG140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228 E1A-XL-M22228 E1A-XL-ME1A, M, XLFAG140 × 250 × 68available to orderon request
    • Series illustration (not a photo of this item): 22228 KMBW33C322228 KMBW33C3clearance C3, MB, lubrication groove and holes, 1:12 tapered boreKG140 × 250 × 68available to orderon request

    Under the price: the difference from the price of this bearing (€82.40).
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 140 × 250 × 68mm
    Cdynamic 628kN

    Spherical roller bearing 22228. Under GOST the same bearing is designated 3528K.

    C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 3528K?

    It is the same bearing under GOST 3189-89: 3528K corresponds to the ISO base 22228. Size 140 × 250 × 68 mm, a full equivalent of 22228.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet