+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
DYZV
22228MBW33 · 140 × 250 × 68

Spherical roller · 22228MBW33

radial — highaxial — medium, on both sides
    Drawing of 22228MBW33: ⌀140 × ⌀250 × 68 mm⌀250⌀1406822228MBW33
    Fig. 1: 22228MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 22228MBW33

    Load: radial high; axial medium, on both sidesSpherical roller

    Bearing DYZV 22228MBW33

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    ISO designation
    GOST number
    Equivalents
    2 exact, 17 approximate
    d
    140 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    250 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    68 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 140 × 250 × 68 from other brands

    20 products
    Series illustration (not a photo of this item): 22228MBW33
    You are viewingDYZV 22228MBW33

    Everything the number specifies matches: series 222, 140 × 250 × 68 mm, open, no protection, normal clearance, special design. The codes in the number are read against the DYZV catalogue.

    • Series illustration (not a photo of this item): 22228MBW3322228MBW33This bearingDYZV140 × 250 × 68available to orderon requestyou are here
    • Series illustration (not a photo of this item): 22228 MBW3322228 MBW33KG140 × 250 × 68available to orderon request
    02

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 140 × 250 × 68mm

    Spherical roller bearing 22228. Under GOST the same bearing is designated 3528K.

    Frequently asked questions

    What is 3528K?

    It is the same bearing under GOST 3189-89: 3528K corresponds to the ISO base 22228. Size 140 × 250 × 68 mm, a full equivalent of 22228.

    Will 22228 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    03

    Reviews

    No reviews yet