+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €0.38 per piece.
16002 · 15 × 32 × 8

Deep groove ball · 16002

radial — mediumaxial — low, on both sides
    Drawing of 16002: ⌀15 × ⌀32 × 8 mm16002
    Fig. 1: 16002, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16002

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing CT 16002

    €0.46per piece incl. VAT
    In stock: 500 pcs
    In the cart

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 8 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    8 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    5.85 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    C0
    2.85 kN
    Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
    m
    0.025 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 15 × 32 × 8 from other brands

    12 products
    Series illustration (not a photo of this item): 16002
    You are viewingCT 16002
    €0.46baseline for the price comparison

    Everything the number specifies matches: series 160, 15 × 32 × 8 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the CT catalogue.

    • Series illustration (not a photo of this item): 1600216002This bearingCT15 × 32 × 8500 pcs€0.46you are here
    • Series illustration (not a photo of this item): 1600216002no brand15 × 32 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600216002KG15 × 32 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600216002SKF15 × 32 × 8available to orderon request

    Under the price: the difference from the price of this bearing (€0.46).
    02

    Often bought with this

    seal 15×32, shaft snap ring Ø15, bore snap ring Ø32

    4 products
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21170 pcs
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 8
    d×D×Bsize 15 × 32 × 8mm
    Cdynamic 5.85kN
    C0static 2.85kN
    mweight 0.025kg

    Deep groove ball bearing 16002. Under GOST the same bearing is designated 7000102.

    C, C₀, m: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 7000102?

    It is the same bearing under GOST 3189-89: 7000102 corresponds to the ISO base 16002. Size 15 × 32 × 8 mm, a full equivalent of 16002.

    Will 16002 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet