+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
16002 · 15 × 32 × 8

Deep groove ball · 16002

radial — mediumaxial — low, on both sides
    Drawing of 16002: ⌀15 × ⌀32 × 8 mm16002
    Fig. 1: 16002, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 16002

    Load: radial medium; axial low, on both sidesDeep groove ball

    Bearing 16002

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    GOST number
    Equivalents
    4 exact, 8 approximate
    d
    15 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    32 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    8 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 15 × 32 × 8 from other brands

    12 products
    Series illustration (not a photo of this item): 16002
    You are viewing16002

    Everything the number specifies matches: series 160, 15 × 32 × 8 mm, open, no protection, normal clearance, ordinary steel, design without special letters.

    • Series illustration (not a photo of this item): 1600216002This bearingno brand15 × 32 × 8available to orderon requestyou are here
    • Series illustration (not a photo of this item): 1600216002CT15 × 32 × 8500 pcs€0.46
    • Series illustration (not a photo of this item): 1600216002KG15 × 32 × 8available to orderon request
    • Series illustration (not a photo of this item): 1600216002SKF15 × 32 × 8available to orderon request
    02

    Often bought with this

    seal 15×32, shaft snap ring Ø15, bore snap ring Ø32

    4 products
    • Seal 15×32JULU 015-32-10 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21150 pcs
    • Seal 15×32JULU 015-32-7 TCWhy it fits: Oil seal 15×32: shaft 15 and housing bore 32, the same as the bearing
      €0.21170 pcs
    • Shaft snap ring Ø15CT SEG 15 Z by 1000Why it fits: DIN 471 snap ring for a 15 shaft: holds the inner ring on the shaft
      €8.92out of stock
    • Bore snap ring Ø32CT SEG 32 W by 1000Why it fits: DIN 472 snap ring for a 32 bore: holds the outer ring in the housing
      €40.80out of stock
    03

    Details

    what this bearing is, questions

    About the bearing

    D 32d 15B 8
    d×D×Bsize 15 × 32 × 8mm

    Deep groove ball bearing 16002. Under GOST the same bearing is designated 7000102.

    Frequently asked questions

    What is 7000102?

    It is the same bearing under GOST 3189-89: 7000102 corresponds to the ISO base 16002. Size 15 × 32 × 8 mm, a full equivalent of 16002.

    Will 16002 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet