Self-aligning ball
Bearing CT 1207K
Supplier’s set and note: +H207
Price on request
Available to order
Specifications
- Manufacturer number
- Equivalents
- 1 exact, 9 approximate
- d
- 35 mm Bore diameter dBearing bore = shaft diameter. Source: supplier data
- D
- 72 mm Outside diameter DOutside diameter = housing bore. Source: supplier data
- B
- 17 mm Width BRing width. Source: supplier data
- Outer ring width C
- 17 mm Outer ring width CWidth of the outer ring. Source: supplier data
- Shaft diameter under the sleeve
- 30 mm Shaft diameter under the sleeveSource: Z&S Adapter p.3
- Adapter sleeve length Ls
- 29 mm Adapter sleeve length LsSource: Z&S Adapter p.3
- Nut outside diameter Dn
- 52 mm Nut outside diameter DnSource: Z&S Adapter p.3
- Nut width Cn
- 8 mm Nut width CnSource: Z&S Adapter p.3
- C
- 15.8 kN Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
