+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
Prices include VAT at the Spain rate (21%); the cart recalculates VAT for your delivery country. Excl. VAT: €4.95 per piece.
1207 · 35 × 72 × 17

Self-aligning ball · 1207

radial — mediumaxial — low, on both sides
    Drawing of 1207: ⌀35 × ⌀72 × 17 mm⌀72⌀35171207
    Fig. 1: 1207, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 1207

    Load: radial medium; axial low, on both sidesSelf-aligning ball

    Bearing Z&S 1207

    €5.99per piece incl. VAT
    Available to orderThe manager confirms the lead time
    In the cart

    Specifications

    Manufacturer number
    Equivalents
    5 exact, 12 approximate
    d
    35 mm
    Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
    D
    72 mm
    Outside diameter DOutside diameter = housing bore. Source: two supplier sources
    B
    17 mm
    Width BRing width. Source: two supplier sources
    Seal
    open, no protection
    Clearance
    normal clearance
    m
    0.32 kg
    MassWeight of the product. Source: supplier data
    01

    Equivalents

    the same size 35 × 72 × 17 from other brands

    19 products
    Photo: 1207
    You are viewingZ&S 1207
    €5.99baseline for the price comparison

    Everything the number specifies matches: series 12, 35 × 72 × 17 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the Z&S catalogue.

    • Photo: 12071207This bearingZ&S35 × 72 × 17available to order€5.99you are here
    • Series illustration (not a photo of this item): 12071207CT35 × 72 × 17151 pcs€2.38−€3.61
    • Series illustration (not a photo of this item): 12071207NTE35 × 72 × 1792 pcs€3.11−€2.88
    • Series illustration (not a photo of this item): 12071207KG35 × 72 × 17available to orderon request
    • Series illustration (not a photo of this item): 12071207NACHI35 × 72 × 17available to orderon request

    Under the price: the difference from the price of this bearing (€5.99).
    02

    Often bought with this

    seal 35×72, shaft snap ring Ø35, bore snap ring Ø72

    6 products
    • Seal 35×72JULU 035-72-12 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.4650 pcs
    • Seal 35×72JULU 035-72-10 TCWhy it fits: Oil seal 35×72: shaft 35 and housing bore 72, the same as the bearing
      €0.502,454 pcs
    • Shaft snap ring Ø35CT SEG 35 Z by 1000Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      €49.66available to order
    • Shaft snap ring Ø35SEG 35 Z (100 pcs)Why it fits: DIN 471 snap ring for a 35 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø72CT SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      €177.06available to order
    • Bore snap ring Ø72SEG 72 W by 1000Why it fits: DIN 472 snap ring for a 72 bore: holds the outer ring in the housing
      Price to be confirmedavailable to order
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 35 × 72 × 17mm
    mweight 0.32kg

    Self-aligning ball bearing 1207. Under GOST the same bearing is designated 1207.

    M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    What is 1207?

    It is the same bearing under GOST 3189-89: 1207 corresponds to the ISO base 1207. Size 35 × 72 × 17 mm, a full equivalent of 1207.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet