+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
102605 · 25 × 62 × 24

Cylindrical roller · 102605 · simplified: rib design, not given in the designation

radial — highaxial depends on the ribs: NU and N take none, NJ one side, NUP both sides
    Drawing of 102605: ⌀25 × ⌀62 × 24 mm⌀62⌀2524102605
    Fig. 1: 102605, end view and section; internal parts simplified per ISO 8826-1; GOST number, dimensions from the GOST↔ISO table CX p.759. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of 102605

    Load: radial high; no axial loadCylindrical roller

    Bearing CT 102605

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    0 exact, 9 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    01

    Equivalents

    the same size 25 × 62 × 24 from other brands

    11 products
    Cross-section drawing to size: Cylindrical roller, 25 × 62 × 24 mm
    You are viewingCT 102605

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2305NU 2305different series: NU2305CT25 × 62 × 2482 pcs€3.91
    • Photo: NUP 2305 ENUP 2305 EEZ&S25 × 62 × 24available to order€10.85
    • Series illustration (not a photo of this item): NJ 2305 E-XL-M1NJ 2305 E-XL-M1E, M1, XLFAG25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 E-XL-TVP2NU 2305 E-XL-TVP2E, TVP2, XLFAG25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 ETVP2NU 2305 ETVP2E, TVP2FAG25 × 62 × 24out of stockon request
    • Series illustration (not a photo of this item): NJ 2305 ECPNJ 2305 ECPreinforced design EC, PSKF25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NJ 2305 ECP/C3NJ 2305 ECP/C3clearance C3, reinforced design EC, PSKF25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 ECP/C3NU 2305 ECP/C3clearance C3, reinforced design EC, PSKF25 × 62 × 24available to orderon request
    • Photo: NJ 2305 C3NJ 2305 C3clearance C3NEU25 × 62 × 24out of stockon request
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 62 × 24mm

    Cylindrical roller bearing 102605.

    Frequently asked questions

    Will 102605 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet