+34 637 212 975 Mon–Fri 8:00–17:00 Madrid time Wishlist0 Compare0
€0.00
NJ 2305 ECP · 25 × 62 × 24

Cylindrical roller · NJ 2305 ECP

radial — highaxial — low, on one side
    Drawing of NJ 2305 ECP: ⌀25 × ⌀62 × 24 mm⌀62⌀2524NJ 2305 ECP
    Fig. 1: NJ 2305 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

    There is no photo of this product: the 3D model and drawing show the dimensions of NJ 2305 ECP

    Load: radial high; axial low, on one sideCylindrical roller NJ

    Bearing SKF NJ 2305 ECP

    Price on request
    Available to order
    Request a quoteIn the cart: send the request

    Specifications

    Manufacturer number
    Equivalents
    1 exact, 8 approximate
    d
    25 mm
    Bore diameter dBearing bore = shaft diameter. Source: supplier data
    D
    62 mm
    Outside diameter DOutside diameter = housing bore. Source: supplier data
    B
    24 mm
    Width BRing width. Source: supplier data
    Seal
    open, no protection
    Clearance
    normal clearance
    C
    64 kN
    Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
    01

    Equivalents

    the same size 25 × 62 × 24 from other brands

    11 products
    Series illustration (not a photo of this item): NJ 2305 ECP
    You are viewingSKF NJ 2305 ECP

    Same size, different design: the difference is written in the row.

    • Series illustration (not a photo of this item): NU 2305NU 2305different designCT25 × 62 × 2482 pcs€3.91
    • Photo: NUP 2305 ENUP 2305 EEZ&S25 × 62 × 24available to order€10.85
    • Series illustration (not a photo of this item): NJ 2305 E-XL-M1NJ 2305 E-XL-M1E, M1, XLFAG25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 E-XL-TVP2NU 2305 E-XL-TVP2E, TVP2, XLFAG25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 ETVP2NU 2305 ETVP2E, TVP2FAG25 × 62 × 24out of stockon request
    • Photo: NJ 2305 C3NJ 2305 C3clearance C3NEU25 × 62 × 24out of stockon request
    • Series illustration (not a photo of this item): NJ 2305 ECP/C3NJ 2305 ECP/C3clearance C3SKF25 × 62 × 24available to orderon request
    • Series illustration (not a photo of this item): NU 2305 ECP/C3NU 2305 ECP/C3clearance C3SKF25 × 62 × 24available to orderon request
    02

    Often bought with this

    seal 25×62, shaft snap ring Ø25, bore snap ring Ø62

    5 products
    • Seal 25×62JULU 025-62-10 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39890 pcs
    • Seal 25×62JULU 025-62-7 TCWhy it fits: Oil seal 25×62: shaft 25 and housing bore 62, the same as the bearing
      €0.39available to order
    • Shaft snap ring Ø25CT SEG 25 Z by 1000Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      €31.6125 pcs
    • Shaft snap ring Ø25SEG 25 Z (100 pcs)Why it fits: DIN 471 snap ring for a 25 shaft: holds the inner ring on the shaft
      Price to be confirmedavailable to order
    • Bore snap ring Ø62CT SEG 62 W by 1000Why it fits: DIN 472 snap ring for a 62 bore: holds the outer ring in the housing
      €112.8412 pcs
    03

    Details

    what this bearing is, questions

    About the bearing

    d×D×Bsize 25 × 62 × 24mm
    Cdynamic 64kN

    Cylindrical roller NJ bearing NJ 2305 ECP.

    C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

    Frequently asked questions

    Will 2305 C3 fit instead?

    Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

    Can I fit another brand instead of this bearing?

    Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

    How do I get a price and a lead time?

    Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

    04

    Reviews

    No reviews yet