Sloboda
SlobodaStubble cultivators · Sloboda
Target stubble cultivator
The Target stubble cultivators are a line for primary and pre-sowing stubble tillage with working widths of 2 to 4 m (models 20/2N to 40N). Working depth is up to 30 cm, and speed is up to 15 km/h for pre-sowing work and up to 10 km/h for primary tillage. A combination of sweeps (6 to 14) and spherical discs (6 to 10) with independent depth adjustment crumbles and levels the soil. The shanks are protected by a shear bolt, and the roller is mechanical or hydraulic. Tractor power is 80 to 175 hp depending on the model.
MoreModel: Stubble cultivators Target 20/2N
Manufacturer: Sloboda
Class: machinery
Type: stubble cultivators
Copy: 1 / 1
//About the machine
Stubblecultivators Target 20/2N
The Target stubble cultivators are a line for primary and pre-sowing stubble tillage with working widths of 2 to 4 m (models 20/2N to 40N). Working depth is up to 30 cm, and speed is up to 15 km/h for pre-sowing work and up to 10 km/h for primary tillage. A combination of sweeps (6 to 14) and spherical discs (6 to 10) with independent depth adjustment crumbles and levels the soil. The shanks are protected by a shear bolt, and the roller is mechanical or hydraulic. Tractor power is 80 to 175 hp depending on the model.
Choose the modelprice, configuration and options are for the selected
Below are the options and parts for the selected model. The model range table compares every model and also switches the selection.
//Technical specifications
data sheet- |Model
- Stubble cultivators Target 20/2N
- |BWorking width, m, min.
- 2 Working width BThe strip the machine works in one pass.
- |hWorking depth, cm
- up to 30 Working depth hHow deep the machine works the soil.
- |vWorking speed for seedbed / primary tillage, km/h
- up to 15/up to 10 Working speed vThe speed the machine works at in the field.
- |Work rate, ha/h
- up to 2.2
- |Number of sweeps/discs, pcs
- 6/6
- |Number of roller sections, pcs
- 1
- |mWeight, kg, max.
- 750 Weight mWeight of the machine without the tractor.
- |NRequired tractor power, hp, min.
- 80 Tractor power NPower of the tractor that pulls the machine at working speed.
- |Attachment type
- mounted
- |Working tools
- modular sweeps 365 mm with replaceable wings and chisel points, spherical discs Ø 460 mm
- |Shanks
- height 820 mm, overload protection by shear bolt
- |Roller
- STS rear support roller
- |Depth adjustment
- mechanical