Veles
VelesSemi-mounted and reversible ploughs · Veles
PO 2-35 mounted reversible ploughs
Veles Agro reversible mouldboard ploughs for ploughing to a depth of 18–35 cm on stone-free soils with a specific resistance of up to 0.09 MPa. The range covers the mounted PO 2–35 models (2 bodies, weight 590–785 kg, draught requirement 65–90 hp) and the semi-mounted PON 5–40+1 and PON 7–40+1 (6–8 bodies, weight 2,900–3,600 kg, tractor power 225–330 hp). The body working width is adjusted by screw mechanisms in the range of 250–500 mm depending on the model. Working speed is 7–10 km/h and transport speed up to 15–20 km/h.
MoreModel: Mounted reversible plough PO 2‒35+ with skimmer
Manufacturer: Veles
Class: machinery
Type: semi-mounted and reversible ploughs
Copy: 1 / 1
//About the machine
Mountedreversible plough PO 2‒35+ with skimmer
Veles Agro reversible mouldboard ploughs for ploughing to a depth of 18–35 cm on stone-free soils with a specific resistance of up to 0.09 MPa. The range covers the mounted PO 2–35 models (2 bodies, weight 590–785 kg, draught requirement 65–90 hp) and the semi-mounted PON 5–40+1 and PON 7–40+1 (6–8 bodies, weight 2,900–3,600 kg, tractor power 225–330 hp). The body working width is adjusted by screw mechanisms in the range of 250–500 mm depending on the model. Working speed is 7–10 km/h and transport speed up to 15–20 km/h.
Choose the widthprice, configuration and options are for the selected
Below are the options and parts for the selected model. The model range table compares every model and also switches the selection.
//Technical specifications
data sheet- |Model
- Mounted reversible plough PO 2‒35+ with skimmer
- |mWeight, kg
- 590 Weight mWeight of the machine without the tractor.
- |Length, mm
- 2,350
- |Width, mm
- 1,535
- |BPlough working width, m
- 0.5 ‒ 0.75 Working width BThe strip the machine works in one pass.
- |Bottom working width, mm
- 250 / 280 / 325 / 360
- |hPloughing depth, cm
- 18 ‒ 35 Working depth hHow deep the machine works the soil.
- |Clearance under frame, mm
- 700
- |Bottom spacing, mm
- 860
- |Plough-bottom standard section, mm
- 30 × 70
- |Main beam section, mm
- 100 × 100 × 8
- |Draft requirement, hp
- 65
- |vRecommended working speed, km/h
- 7 ‒ 10 Working speed vThe speed the machine works at in the field.
- |Transport speed, max., km/h
- 15
- |Number of working tools, pcs
- 2
- |Height, mm
- 1,540