+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 2309 E: ⌀45 × ⌀100 × 36 mm⌀100⌀4536NUP 2309 E
Fig. 1: NUP 2309 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NUP 2309 E

Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing Z&S NUP 2309 E

€18.70per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 14 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
36 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.36 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 100 × 36 from other brands

15 products
Photo: NUP 2309 E
You are viewingZ&S NUP 2309 E
€18.70baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU 2309different designCT45 × 100 × 368 pcs€6.71−€11.99Request a quote
  • Photo: NJ 2309 E1MNJ 2309 E1ME1, MNEU45 × 100 × 36available to order€55.94+€37.24Request a quote
  • Photo: NU 2309 ETVP2 C3NU 2309 ETVP2 C3clearance C3, E, TVP2FAG45 × 100 × 36available to order€74.03+€55.33Request a quote
  • Series illustration (not a photo of this item): NJ 2309 ENJ 2309 Edifferent designCT45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU2309-E-XL-TVP2E, TVP2, XLFAG45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU2309ET *55, E, TNSK45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309 ECML/C3clearance C3, reinforced design EC, MLSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ2309 ECP/C3clearance C3, reinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€18.70).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 100 × 36mm
mweight 1.36kg

Cylindrical roller NUP bearing NUP 2309 E.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2309 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet