+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 2309 E: ⌀45 × ⌀100 × 36 mm⌀100⌀4536NJ 2309 E
Fig. 1: NJ 2309 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2309 E

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing CT NJ 2309 E

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 13 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
36 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
160 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 45 × 100 × 36 from other brands

15 products
Series illustration (not a photo of this item): NJ 2309 E
You are viewingCT NJ 2309 E

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU 2309different designCT45 × 100 × 368 pcs€6.71Request a quote
  • Photo: NUP 2309 ENUP 2309 Edifferent designZ&S45 × 100 × 36available to order€18.70Request a quote
  • Photo: NJ 2309 E1MNJ 2309 E1ME1, MNEU45 × 100 × 36available to order€55.94Request a quote
  • Photo: NU 2309 ETVP2 C3NU 2309 ETVP2 C3clearance C3, E, TVP2FAG45 × 100 × 36available to order€74.03Request a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU2309-E-XL-TVP2E, TVP2, XLFAG45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU2309ET *55, E, TNSK45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309 ECML/C3clearance C3, reinforced design EC, MLSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 45 × 100 × 36 mmNJ2309 ECP/C3clearance C3, reinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 45 × 100 × 36 mmNU 2309 ECPreinforced design EC, PSKF45 × 100 × 36available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 100 × 36mm
Cdynamic 160kN

Cylindrical roller NJ bearing NJ 2309 E.

C: CT data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2309 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet