+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NUP 2307 E: ⌀35 × ⌀80 × 31 mm⌀80⌀3531NUP 2307 E
Fig. 1: NUP 2307 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing Z&S NUP 2307 E — photo 1
Bearing Z&S NUP 2307 E — photo 2
Load: radial high; axial low, on both sidesCylindrical roller NUP

Bearing Z&S NUP 2307 E

€15.07per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 8 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.751 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 80 × 31 from other brands

9 products
Photo: NUP 2307 E
You are viewingZ&S NUP 2307 E
€15.07baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 35 × 80 × 31 mmNU 2307different designCT35 × 80 × 3124 pcs€4.82−€10.25Request a quote
  • Photo: NJ 2307 ENJ 2307 Edifferent designZ&S35 × 80 × 31available to order€14.44−€0.63Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ2307-E-XL-TVP2-C3clearance C3, E, TVP2, XLFAG35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ2307ET *55, E, TNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 35 × 80 × 31 mmNU2307ET *55, E, TNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ 2307 ECP/C3clearance C3, reinforced design EC, PSKF35 × 80 × 31available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ 2307 EMAS P63precision class P6, E, MA, S, 3: not decodedZVL35 × 80 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 2307E C3NJ 2307E C3clearance C3ZVL35 × 80 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€15.07).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 31mm
mweight 0.751kg

Cylindrical roller NUP bearing NUP 2307 E.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet