+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NJ 2307 E: ⌀35 × ⌀80 × 31 mm⌀80⌀3531NJ 2307 E
Fig. 1: NJ 2307 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2307 E

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing Z&S NJ 2307 E

€14.44per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
OEM number
35 RJ 23
Equivalents
1 exact, 8 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
98 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.736 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 80 × 31 from other brands

9 products
Photo: NJ 2307 E
You are viewingZ&S NJ 2307 E
€14.44baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 35 × 80 × 31 mmNU 2307different designCT35 × 80 × 3124 pcs€4.82−€9.62Request a quote
  • Photo: NUP 2307 ENUP 2307 Edifferent designZ&S35 × 80 × 31available to order€15.07+€0.63Request a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ2307-E-XL-TVP2-C3clearance C3, E, TVP2, XLFAG35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ2307ET *55, E, TNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 35 × 80 × 31 mmNU2307ET *55, E, TNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 35 × 80 × 31 mmNJ 2307 ECP/C3clearance C3, reinforced design EC, PSKF35 × 80 × 31available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ 2307 EMAS P63precision class P6, E, MA, S, 3: not decodedZVL35 × 80 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 2307E C3NJ 2307E C3clearance C3ZVL35 × 80 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€14.44).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 31mm
C0static 98kN
mweight 0.736kg

Cylindrical roller NJ bearing NJ 2307 E.

C₀, m: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet