+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 2307 2RS: ⌀35 × ⌀80 × 31 mm⌀80⌀35312307 2RS2RS
Fig. 1: 2307 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2307 2RS

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing Z&S 2307 2RS

€15.19per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 12 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
m
0.975 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 35 × 80 × 31 from other brands

15 products
Photo: 2307 2RS
You are viewingZ&S 2307 2RS
€15.19baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23072307open, no protectionCT35 × 80 × 31116 pcs€3.36−€11.83Request a quote
  • Photo: 23072307open, no protectionZ&S35 × 80 × 31available to order€15.19same priceRequest a quote
  • Series illustration (not a photo of this item): 23072307open, no protectionKG35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 5open, no protection, 5NSK35 × 80 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2307 K C32307 K C3open, no protection, clearance C3, 1:12 tapered boreNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 KTNGopen, no protection, TNG, 1:12 tapered boreNSK35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EKTN9open, no protection, different cage, E, 1:12 tapered boreSKF35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 EMopen, no protection, different cage, ESKF35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 ETN9open, no protection, different cage, ESKF35 × 80 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 35 × 80 × 31 mm2307 ETN9/C3open, no protection, clearance C3, different cage, ESKF35 × 80 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€15.19).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 80 × 31mm
mweight 0.975kg

Self-aligning ball bearing 2307-2RS, design 2RS: contact seals on both sides.

M: Z&S data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet